污泥负荷对生物处理系统耐药细菌的影响研究

为了研究污水生物处理工艺中抗药性细菌生长和分布特性及污泥负荷的影响,构建了不同处理负荷的活性污泥工艺,并以磺胺嘧啶抗性异养菌为例,阐述了污泥负荷对活性污泥系统中典型抗药细菌的生长及排放特性的影响.结果表明,污泥负荷增大有利于磺胺嘧啶抗性异养菌的生长繁殖,负荷提高后净比生长速率和细菌产量分别由0.32d-1和2.3×106CFU/d提高至0.33d-1和3.1×106CFU/d,活性污泥、出水和剩余污泥中抗药菌的浓度也均显著提高(P < 0.05),但对抗药细菌的相对丰度无显著改变.低污泥负荷下[0.24kg COD/(kg MLSS?d)]抗药细菌主要通过剩余污泥形式排放,排放量比(泥中排放量/水中排放量)为28.4;负荷提高至0.4kg COD/(kg MLSS?d)后,出水抗药细菌排放量显著提高,排放量比为1.1.处理相同水量,高污泥负荷下排放的抗药细菌总量明显降低,提高污泥负荷有利于活性污泥系统抗药性风险的控制.     

Continuous biohydrogen production from diluted molasses in an anaerobic contact reactor

An anaerobic contact reactor (ACR) system comprising a continuous flow stirred tank reactor (CSTR) with settler to decouple the hydraulic retention time (HRT) from solids retention time (SRT) was developed for fermentative hydrogen production from diluted molasses by mixed microbial cultures. The ACR was operated at various volumetric loading rates (VLRs) of 20–44 kgCOD·m^-3·d^-1 with constant HRT of 6 h under mesophilic conditions of 35°C. The SRT was maintained at about 46–50 h in the system. At the initial VLR of 20 kgCOD·m^-3·d^-1, the hydrogen production rate dropped from 22.6 to 1.58 L·d^-1 as the hydrogen was consumed by the hydrogentrophic methanogen. After increasing the VLR to 28 kgCOD·m^-3·d^-1 and discharging the sludge for 6 consecutive times, the hydrogentrophic methanogens were eliminated, and the hydrogen content reached 36.4%. As the VLR was increased to 44 kgCOD·m^-3·d^-1, the hydrogen production rate and hydrogen yield increased to 42.1 L·d^-1 and 1.40 mol H₂·molglucose-consumed^-1, respectively. The results showed that a stable ethanol-type fermentation that favored hydrogen production in the reactor was thus established with the sludge loading rate (SLR) of 2.0–2.5 kgCOD·kgMLVSS^-1·d^-1. It was found that the ethanol increased more than other liquid fermentation products, and the ethanol/acetic acid (mol/mol) ratio increased from 1.27 to 2.45 when the VLR increased from 28 to 44 kgCOD·m^-3·d^-1, whereas the hydrogen composition decreased from 40.4% to 36.4%. The results suggested that the anaerobic contact reactor was a promising bioprocess for fermentative hydrogen production.     

我国典型农区耕地承载畜禽容量对比分析

根据农田养分平衡理论,对我国南北两个县级区域山东禹城和湖南桃源的耕地承载畜禽容量和负载指数进行了对比分析。 基于农田N收支情景分析表明:当农田施用粪便N分别占到总投入N的30%、60%和100%时,山东禹城耕地承载畜禽容量分别为4.1、8.3和13.8 LU·hm^-2,相应负载指数分别是2.2、1.1和0.7,湖南桃源耕地承载畜禽容量分别是4.4、8.7和14.6 LU·hm^-2,相应负载指数分别是1.4、0.7和0.4;基于农田N收支的耕地畜禽容量呈现为禹城略低于桃源,负载指数呈现为禹城显著高于桃源。基于农田P收支情景分析表明:当农田施用粪便P₂O₅分别占总施入P₂O₅的30%、60%和100%时,山东禹城耕地承载畜禽容量分别为6.7、13.5和22.5 LU·hm^-2,相应的耕地畜禽承载指数分别是1.3、0.7和0.4,湖南桃源耕地承载畜禽容量分别是2.5、5.1和8.5 LU·hm^-2,相应的负载指数分别是2.4、1.2和0.7,基于农田P收支的耕地畜禽容量呈现为禹城显著高于桃源,负载指数为禹城低于桃源。可见,禹城基于农田N收支的耕地承载畜禽容量显著低于基于农田P收支的耕地承载畜禽容量,桃源正好与禹城相反。因此,今后在制定减少农田环境污染对策时,禹城应首先考虑农田N收支及粪便N的有效管理与利用;桃源则应首先考虑农田P收支及粪便P的有效管理与利用,并且因为区域内乡镇之间存在较大差异,还应在乡镇之间进行协调平衡。     

辽西风积土路基振陷研究及数值模拟

随着铁路车辆轴重增大、速度提高以及行车密度加大,长期行车必然使路基产生较大的累积塑性变形,因此对路基振陷的进一步研究已刻不容缓。本文主要以辽西高速铁路沿线的风积土路基为研究对象,取其原状土,通过室内常规土工试验获取风积土的基本物理和力学参数;根据试验结果,对风积土在长持时动荷载下的振陷量进行回归分析,进而得出预测振陷的方法;基于MIDAS软件,进行风积土路基在列车振动荷载下的振陷的数值模拟,根据模拟过程中参数的调整,得出风积土路基振陷量随参数的变化关系;最后,提出针对风积土路基抗振设计和隔振措施,进而得到用于指导风积土路基抗振和隔振措施的统一设计方法。     

基于积尘负荷的西安市铺装道路扬尘排放研究

近年来城市颗粒物污染问题日渐突出,严重影响着人们的环境幸福指数和对美好环境的期待.道路扬尘作为城市扬尘的重要组成部分,对颗粒物污染的贡献不容小觑.在此背景下,采用积尘负荷法采集西安市快速路、主干道、次干道、支路等4种类型25条道路的道路扬尘样品,并分析采样速率、采样次数等因素对采样效率的影响.在此基础上,计算得到西安市各类型道路的平均积尘负荷,结合车流量、车重、道路长度,通过《扬尘源颗粒物排放清单技术指南》中的公式计算得到各种类型道路TSP、PM₁₀、PM_2.5的排放系数及排放量.结果显示：采样速率为1.0 m²·min^-1,采样次数为两次可满足采样要求.不同类型道路积尘顺序为：支路（4.18 g·m^-2）>次干道（2.80 g·m^-2）>快速路（1.49 g·m^-2）>主干路（1.34 g·m^-2）;道路积尘TSP、PM₁₀、PM_2.5的平均排放系数分别为6.066、1.542和0.447 g·km^-1.快速路和主干路的扬尘排放系数较小,支路的扬尘排放系数次之,次干路的扬尘排放系数较大.采用Monte Carlo方法对TSP、PM₁₀和PM_2.5的排放量进行不确定性分析,在95%的概率分布范围下,三者定量不确定性均为-16.88%~17.96%.     

循环载荷下煤样渗透特性试验研究

以原煤煤样为研究对象,采用自主研发的三轴应力渗流实验系统,进行等幅循环加、卸载的渗透率测试,研究煤样疲劳损伤过程中渗透率对应力水平的响应特征。结果表明:上、下限应力点处渗透率随循环次数出现降低-稳定-升高3个阶段,整体呈“U”型,并且随着上限应力水平的升高,曲线有向“V”型发展的趋势。拟合结果显示:在渗透率降低阶段,渗透率与循环次数呈幂指数函数关系;在渗透率升高阶段,渗透率与循环次数呈指数函数关系,并且渗透率随循环次数的降低和升高速率与上限应力水平正相关。     

山丘地形下近浅埋煤层综采面静动载叠加的矿压显现特征研究

针对近浅埋综采面过山丘地形发生强矿压显现的问题,采用现场监测、理论分析与数值模拟相结合的方法,建立山丘静载应力传递模型和不同岩层赋存特征的沙土型与土石型山丘工作面关键块体结构力学模型,分析山丘地形工作面矿压发生机理。研究表明:山丘静载向工作面传递的垂直应力呈钟形分布,山丘高静载应力易激发弱铰接结构失稳;山丘坡体中关键层的有无导致了土石型和沙土型山丘工作面矿压发生机理的差异性;坡体断裂块的倾斜回转运动是沙土型山丘工作面发生强矿压的主导因素,断裂块不同的倾斜回转方向导致工作面在上坡段矿压显现缓和而下坡段显现剧烈;土石型山丘工作面的矿压显现主要受坡体中关键块体结构稳定状态的控制,工作面在上坡初和坡顶段动载矿压强烈而下坡段后期较缓和。数值计算结果与现场监测和理论分析相符。     

长江上游山丘区土地承载力研究与评价——以四川省宜宾市为例

我国是一个以山地为主的国家,耕地有限且以山丘坡耕地为主,协调人地关系非常重要.以四川省宜宾市为例,通过土地资源生产潜力和人口数量预测模型的建立,采用环境容量等级系数计算和等级划分方法,对基于水土流失和生态工程建设作用下的长江上游流域山丘区土地利用类型与格局的变化及其它人类活动对土地承载力的影响进行了研究与评价.研究结果表明,宜宾市土地资源的生产潜力在2010、2015、2020年时总体上都能承载3种生活类型条件下的人口数量,3种生活类型下的容量等级基本都在"3"以上,即达到"满足"水平,并呈现出向"富余"水平提高的趋势,这表明尚具有较大潜力和空间的土地承载力是宜宾区域经济发展的有利驱动因素,人类活动对土地承载力产生的影响在可承受的生态阈值之内,为长江上游流域及我国广大山丘地区的生态环境建设和区域发展提供了可靠依据.     

Postural Loading Assessment in Assembly Workers of an Iranian Telecommunication Manufacturing Company

Background. Changes in industries and work practices have coincided with work-related musculoskeletal disorders (MSDs). This study was conducted to determine the prevalence of MSDs and to assess postural loading in assembly workers of an Iranian telecommunication manufacturing company. Methods. Data were collected from 193 randomly selected workers in 4 units of the company. The Nordic musculoskeletal disorders questionnaire and the UBC ergonomic checklist were used as data collection tools. Loading on the upper body assessment (LUBA) was used to assess postural loading. Results. Lower back symptoms were the most prevalent problems among the workers (67.9%). LUBA showed that most assembly workers (94.3%) had experienced considerable and high postural loading (postural load index, PLI > 5). Regression analyses revealed that lighting, rotation, contact stress, repetition, gender and age were factors associated with symptoms. Conclusion. Work-related MSDs occurred at a high rate among workers. Postural loading requires consideration. Any ergonomic intervention should focus on eliminating ergonomic factors associated with symptoms.     

Alveolar Macrophage (AM) Mobility Reduction as a Result of Long-Term Exposure to High Dust Concentration in Inhaled Air

The influence of high concentration of insoluble particles in inhaled air on the alveolar macrophage (AM) mobility is analyzed. Kinetics of phagocytosis and the mobility of AM as a function of overloading is proposed. Three patterns of AM displacement on the surface of alveolus are distinguished depending on the loading of the surface with insoluble deposits, namely, directional being a result of surfactant activity, directional with a chemotactic bias, and purely random. The exit time of AM from alveolus under overloading is calculated.